When carrying out decoration work inside a house, the important thing is not style and quality, but size and flatness. Only when these two factors are in place can the above two situations be achieved. Otherwise, most of the time, perfect style cannot be achieved, and the difficult operation is leveling. Sometimes it is difficult to remove the leveling device, so how to remove the tile leveling device? How to do tile leveling?
How to remove the tile leveler
The sequence and method of dismantling leveling templates should be carried out in accordance with the provisions of the panel design, following the principle of supporting first and then dismantling, non load bearing parts first, then load bearing parts, and from top to bottom. It is strictly prohibited to use hammers and pry bars to forcefully pry open the templates during dismantling.
1. First remove the side formwork, then remove the load-bearing formwork.
2. The combined large template should be dismantled as a whole in large pieces.
3. The supporting and connecting components should be disassembled along with the components, and the formwork should be disassembled and transmitted along with the blocks. During disassembly, the formwork and concrete should not be damaged.
4. The removed templates and accessories should be sorted and neatly stacked, and the accessories should be placed in the toolbox.
How to do tile leveling
1. Cement mortar leveling: suitable for leveling various floors and floors before laying. The leveling thickness is too thick at 25-35mm. If the cement mortar ratio is not correct, it will cause the surface layer to powder, sand, dust, and crack. The floor (composite floor) forms some gaps with the leveling layer, and when people step on it, they compress the dust on the ground and disperse it to the surrounding areas. Then, it escapes through the expansion joints and spreads out through the gaps of the skirting board, forming a phenomenon of dust lifting. Additionally, areas where the cement mortar is not leveled thoroughly may experience hollowing.
2. Gypsum leveling: can be used for local leveling without raising the ground, with a leveling thickness of about 5-20mm, almost no impact on the height of the room, fast drying speed, relatively cheap price, and convenient construction. But it can only be used for leveling in a small area.
3. Self leveling: no segregation (various components in cement mortar do not separate during the entire construction process and after hydration reaction), no sanding, no dust, no cracks; The shrinkage rate is low, usually between 0.3 and 0.4 parts per thousand. After hydration reaction, no cracks appear on the surface, while ordinary cement has a high shrinkage rate and is prone to cracking. The construction thickness is relatively thin, ranging from 2-5mm. After 4-8 hours of construction, the surface can be cleared, and floor paving can be carried out 36-48 hours later. But it cannot be done locally, it needs to be done as a whole house.
Ceramic tile leveler, also known as ceramic tile leveler, is a very exciting time for ordinary workers when decorating a new house. They have many ideas but lack experience, so they are very frustrated. Today, the editor will give a lecture to Xinye on the things to pay attention to when tiling tiles.
Tile leveling is a crucial step, and the lobby is an area with a large range of activities. Generally, we use tiles, but if the tiles are not properly installed, it will directly affect the experience of the new home. In the past, the installation was done directly by selecting experienced craftsmen, such as the famous Sichuan bricklayer master. But if you are unlucky enough to encounter a bricklayer with average skills, it will be very frustrating and you cannot replace them halfway. With the advancement of technology, people have invented tile levelers, also known as tile levelers or tile pavers. With this tool, whether you are a master or a novice, it is very convenient, and the pasting is fast and flat. There are currently two types of tile levelers on the market: disposable levelers and rotary reusable levelers.